Target Group

Maintenance personnel

Service personnel

Operators

Course Description / Objective

The Totally Integrated Automation Portal (TIA Portal) forms the work environment for integrated engineering with SIMATIC STEP 7 and SIMATIC WinCC.

In this first part of the SIMATIC TIA Portal service training, we teach you the handling of the TIA Portal, basic knowledge about the structure of the SIMATIC S7 automation system, configuration and parameterization of hardware, and the basics of programming. You also receive an overview of HMI, PROFINET IO, and connecting drives. You will learn to diagnose and clear simple hardware faults and software errors. You will thus be capable of reducing downtimes in your plant.

After attending the course, you can do the following:

• Understand the fundamentals of interaction of the TIA components
• Reliably operate the "TIA Portal" engineering platform
• Understand, change, and expand small STEP 7 programs
• Configure, parameterize, and exchange SIMATIC S7 modules
• Diagnose and fix simple hardware faults using the wiring test
• Diagnose and fix simple program errors using the status block
• Perform simple commissioning of TIA components

Course Content

• Overview and significant performance characteristics of the SIMATIC S7 system family
• The components of the TIA Portal: STEP 7, WinCC, communication
• Program execution in automation systems
• Binary and digital operations in the function block diagram (FBD)
• Setup and assembly of the automation system
• Addressing and wiring the signal modules
• Hardware and software commissioning of the SIMATIC S7 automation system with the TIA Portal
• SIMATIC S7 hardware configuration and parameterization
• Presentation of a Touchpanel
• Presentation of the drive
• Setup and parameterization of PROFINET IO
• Saving and documentation of the implemented program changes with the TIA Portal
• Deeper understanding of contents through practical exercises on the SIMATIC S7-1500 system model

Registration Method

SITRAIN only accepts training registration by e-PASS. Please register our training courses thru e-PASS. Course Fee listed is excluding 12% VAT

Note

• The minimum participants for per class is 4 pax. If the course registration participants do not meet the minimum no of paxs, the class will be re-scheduled.
• Course registration is on first-come-first-served basis.
• Full payment has to be made before commencement of the course.
• If participant cancels the course after receiving the official course confirmation, the following cancellation fees apply :
  • Within 2 weeks prior to start date of course / after confirmation is sent : 100% of order value
  • Non Attendance after receiving an official course confirmation : 100% of order value
• The Center reserves the right to reschedule a course in any event, and in such cases, course participants can choose to withdraw without penalty.
• Certificates will only be issued to participants with 75% attendance and course fee fully paid to Siemens.
• Please choose mode of payment when you register your course