Target Group

Decision makers
Planners
Sales personnel
Configuring engineers
Commissioning engineers
Engineering personnel
Project engineers
Maintenance personnel
Service personnel
Industry: COOs
IT: CIOs, network planners and administrators

Course Description / Objective

Ethernet has found its way into the industrial environment. A high degree of reliability and throughput rates are demanded from industrial networks. At the same time a reliable integration into a corporate network is highly required.

Upon completion of this course, participants will gain the theoretical and practical knowledge required for real world implementation of Industrial Networks and the methods applied to operate and maintain such networks. You will also gain theoretical and practical knowledge of what IP communications, routing protocols, redundancy, LAN/WAN concepts that helps facilitate communications between multiple network locations. In addition, participants will apply these concepts on RUGGEDCOM devices.

Participants shall have basic knowledge of Ethernet and should be familiar with network topologies, Media Access Control (MAC), Internet Protocol, data transport and associated technical vocabulary. It is also helpful if you are familiar with the principles of operation of switches and the OSI reference model. We also recommend attending the "Ethernet Fundamentals in Industrial Networks" training course.

Course Content

• Switching:
  • Layer 2 Technology Overview
  • Switching in Industrial Ethernet Networks
  • Commissioning with RUGGEDCOM Operating System (ROS)
  • Port Configuration
  • Redundancy in Switched Networks (Rapid Spanning Tree Protocol)
  • Network segmentation with Virtual Local Area Networks (VLAN)
  • Increasing bandwidth availability (Link Aggregation)
  • Integrating Serial Protocols
  • Monitoring (ROS)
  • Diagnostics and Troubleshooting (ROS)
• Routing:
  • Layer 3 Technology Overview
  • Commissioning with ROX Operating System
  • LAN and IP interfaces
  • WAN interfaces
  • Internet Protocol Services
  • Router redundancy (VRRP)
  • Static Routing
  • Dynamic Routing (OSPF)
• Practical exercises using the RUGGEDCOM products

Registration Method

Please register our training courses thru e-PASS.

Course Fee listed is excluding 6% GST

Note

The minimum participants for per class is 6/8 paxs. If the course registration participants do not meet the minimum no of paxs, the class will be re-scheduled.

- Course registration is on first-come-first-served basis.
- Full payment has to be made before commencement of the course.
- If participant cancels the course after receiving the official course confirmation, the following cancellation fees apply :
> Within 2 weeks prior to start date of course : 50% of order value
> Within 1 week prior to start date of course : 100% of order value

Certificates will only be issued to participants with 75% attendance and course fee fully paid to Siemens.

Please choose mode of payment when you register your course.